Friday, October 18, 2019
The Knowledge gained from experience and education Research Paper
The Knowledge gained from experience and education - Research Paper Example A dissertation shows that an individual can work alone and helps in the individualââ¬â¢s career development while assessing the skills and competencies (White, 2003, p.3). All through my course work, I have learnt allot in the Human resources management; the role of human resources in competitive success, strategic human resource management and human resource planning, foundations of recruitment and selection and psychological perspectives of Human Resources Management, the foundations of performance management, managing compensation and rewards and the contemporary issues affecting human resources management. All these have enabled me have a greater understanding of Human resource management as a course. Each of these chapters and units have been accompanied and presented with a case study to better understand the concepts. Since the main function and goal of the Human resources management of any company is to supervise the employees, I will be able to help the company attain its goals by maximizing on the employees capability and at the same time motivating them. This friendly environment will make the company soar into greater heights. The Human Resources department of any company brings all the employees together to be able to act as a team to achieve the desired goals. I have learnt that for a company to boost the employee loyalty, their basic employment needs and requirements need to be met in time. Such basic needs include timely release of the pay checks, provision of health benefits and salary increase. I have also learnt that the Human resources department is concerned with the adherence to the corporate social responsibility (CRS) policies by showing the staff that they are highly appreciated and recognized. I will be able to conduct my research through intensive research methodology which will enable me acquire
Thursday, October 17, 2019
Evaluation of Banking Competition between 2 countries Essay
Evaluation of Banking Competition between 2 countries - Essay Example This set of statistical methods aids in the instrumentation of a unique symmetric and unbiased estimator to calculate the central moment for a given distribution. For instance, the estimator h can be evaluated as: 1. Both the countries are members of the developed world. Sufficient data is available to carry out the required estimation over an extended period of time. For example, CL, NA, OBS, DEP, etc. were available for Antwerps Beroepskrediet (which is a Belgian cooperative bank) over the years 1998, 2001 and 2004. In the case of Denmark too, similar variety and quantity of critical data were available. 2. The countries are important members of the EU. Both of them share the compact regional economy of the Western Europe. Apart from availability of data, the Belgian and Danish banks are facing several challenges due to expansion of the EU. 3. Both the countries have advanced following the capitalist model of development. The geographical vicinity between them might have caused mutual influence and serious undercurrents in the bilateral relationships. In the sphere of analysis of banking competition, J. A. Bikker and J. W. B. Bos have eloquently remarked, ââ¬Å"In observing trends, we distinguish original causes, subsequent changes in banking behavior and in the structure of financial markets, and final consequences, aware all the while, that this classification may be somewhat arbitrary.â⬠(Bikker, J. A. and Bos, J. W. B., 2008) In this way, country specific banking behaviour can be put in correlation with financial markets which are profoundly influenced by the bond markets and the quantity of national assets. With the lapse of time, apart from qualitative analysis, quantitative methods too have emerged as tools of critical importance in modern financial research (McCrary, S. A., 2010). The Panzar-Rosse revenue test to estimate the competitive circumstances and parameters in the realm of banking depends on certain empirical
Wednesday, October 16, 2019
International Management Ethics and Values Case Study
International Management Ethics and Values - Case Study Example Thus, it will allow the revealing of the variations or mutations that would lead to genetic disorders. This ethical theory will help in guiding the employees to take the test ethically and then help in delegating the task accordingly. (b) From the above statement the author of the study is trying to make a statement that people suffering from generic disorders cannot change their jobs or the employer cannot change the business environment. The changing of business environment because of certain employees who are more susceptible to the disease would be irrational because it would require the changing of entire business procedure. The above statement resembles the Descriptive theory which emphasize on the ââ¬Å"What Ifâ⬠behaviour of the company and an individual (Dimitriou et. al., 2011). (c) The passing of several legislature laws to curb down the effects of the generic testing has been effective to a certain extent only. The generic testing itself is an intrusive behaviour an d the legal law imposes certain restrictions on it for the welfare of the common people. Thus, it can be observed that the entire process resemble the Normative ethical principles. It is a systematic process to justify the morality of the society. Answer 2 (a) Moral and Ethics are used interchangeably and is useful to make certain distinctions like morality would be used to distinguish between right and wrong. It would be served as a guide to make right decisions though moral conduct. Ethical values are nothing but the subject of the morality. The moral theories of right are basically structured set of statements which lays emphasis on how individuals conduct actions and then determine the right and wrong between them. The morality of an action is determined and there is a sharp divide between the applied ethics and moral theories. The morality of the decision will be evaluated and the correct decision will be taken only after evaluation of various alternative actions. In this case it is observed that Genetic testing would involve the testing of gene mutation of the individuals and it is a systematic procedure which involves the assistance from the employers (Pollock, 2011). (b) Utilitarianism is a concept which has been derived from the Normative Ethics and helps in the maximization of the utility process which helps in reducing suffering and increasing welfare of the people. It can be regarded as a reduction approach which works for the welfare of the people. However, it can be regarded as a technique which that determines the moral value of action. It helps us in understanding whether our actions conducted in the past are having an effect in the present or not. The theory would be only utilitarianism if it can helps in distinguishing between right and wrong and provide provides goodness to a majority of the people. The generic screening test provided by the employers of an organization would not only help them in selecting candidates who are less susceptibl e to the disease. The screening test would not only be helpful in selecting the most appropriate candidate but would also enable the candidate to come in terms with their reality. The screening test would be done keeping in mind the benefits of an entire mass (George, 2011). (c) The justice of fairness developed by John Rawls is regarded as one of the classical ethical theories which help in evaluation of moral and ethical values (Wofford College, 2000). As per this theory each individual
Evaluation of Banking Competition between 2 countries Essay
Evaluation of Banking Competition between 2 countries - Essay Example This set of statistical methods aids in the instrumentation of a unique symmetric and unbiased estimator to calculate the central moment for a given distribution. For instance, the estimator h can be evaluated as: 1. Both the countries are members of the developed world. Sufficient data is available to carry out the required estimation over an extended period of time. For example, CL, NA, OBS, DEP, etc. were available for Antwerps Beroepskrediet (which is a Belgian cooperative bank) over the years 1998, 2001 and 2004. In the case of Denmark too, similar variety and quantity of critical data were available. 2. The countries are important members of the EU. Both of them share the compact regional economy of the Western Europe. Apart from availability of data, the Belgian and Danish banks are facing several challenges due to expansion of the EU. 3. Both the countries have advanced following the capitalist model of development. The geographical vicinity between them might have caused mutual influence and serious undercurrents in the bilateral relationships. In the sphere of analysis of banking competition, J. A. Bikker and J. W. B. Bos have eloquently remarked, ââ¬Å"In observing trends, we distinguish original causes, subsequent changes in banking behavior and in the structure of financial markets, and final consequences, aware all the while, that this classification may be somewhat arbitrary.â⬠(Bikker, J. A. and Bos, J. W. B., 2008) In this way, country specific banking behaviour can be put in correlation with financial markets which are profoundly influenced by the bond markets and the quantity of national assets. With the lapse of time, apart from qualitative analysis, quantitative methods too have emerged as tools of critical importance in modern financial research (McCrary, S. A., 2010). The Panzar-Rosse revenue test to estimate the competitive circumstances and parameters in the realm of banking depends on certain empirical
Tuesday, October 15, 2019
Biblical Worldview Essay Essay Example for Free
Biblical Worldview Essay Essay The Apostle Paul wrote to the Roman church to prepare them for his visit to Rome prior to leaving for Spain. He explained to the church how Christians, Jews and Gentiles alike, should view the natural world, our identity, our relationships, and our culture due to our relationship with Christ. He explains the necessity for righteousness because without Christ we are dead in our sin. But God, through his goodness and grace has provided a way to righteousness through Jesus Christ. The Natural World According to Genesis, God created the heavens and earth (our natural world) and everything in them. In Romans 1:20 Paul states, ââ¬Å"For since the creation of the world Godââ¬â¢s invisible qualities-his eternal power and divine nature-have been clearly seen, being understood from what has been made, so that men are without excuse.â⬠God created the world, his power and authority is evident in this creation and in this way man was supposed to know Him. However they turned their backs on him and according to verse 22 ââ¬Å"exchanged the glory of the immortal God for images made to look like mortal man and birds and animals and reptiles.â⬠Because of Adam and Eveââ¬â¢s disobedience in the Garden of Eden, sin came into our natural world which started the demise of spiritual man as well as Godââ¬â¢s intended order. Human Identity ââ¬Å"God created man in his own image,â⬠(Gen 1:27). Our identity is firmly established by knowing God, more specifically, knowing God through Jesus Christ. We are created with a ââ¬Å"God shaped voidâ⬠in our spirit man. If we do not fill that void with a relationship with God, we will seek to fill it with anything else that gives us temporary pleasure. Paul says in Romans chapter 1, that men turned away from God and turned to idol worship. Three times in this chapter Paul states that God ââ¬Å"gave them overâ⬠to their sinful desires (v.24), their shameful lusts (v. 26), and their depraved minds. (v28). In and of ourselves, we are destined to die, not only physically but spiritually. God however, has made a way. Paul eloquently shares the path to salvation, righteousness, and sanctification through Jesus Christ.
Monday, October 14, 2019
The Chemistry of Swimming Pools
The Chemistry of Swimming Pools Pool chemistry is the application of chemistry to maintain safe and clean water (Hann, 1997). This is achieved by regulating numerous factors which include: the pH, the quantity of disinfectant and the buffers used to resist pH changes. The normal pH range of a swimming pool needs to be between 7.2 and 8.0, although a range between 7.2 and 7.8 is more practical as some disinfectants such as chlorine are most effective for this range (Hann, 1997). The Importance of pH The pH scale (see figure 1) is a measure of the concentration of hydrogen ions (H+) in a solution and is a logarithmic scale based on 10 (Zumdahl, 2007). Furthermore, it is represented by the equation: pH = -log[H+] (Zumdahl, 2007), and since the scale is logarithmic, this means that a pH increase of one value represents a H + concentration increase of tenfold. The pH scale ranges from one, which is very acidic, to fourteen which is very alkaline. A value of seven is neutral, meaning that a solution is neither acidic nor basic (Hann, 1997). The pH scale (Environment Canada, 1992) A strong acid dissociates completely in water to produce H+ ions in the form of H3O+ (hydronium ion), whereas a weak acid does not dissociate completely, causing a lower H+ concentration to form (Zumdahl, 2007). Since an acid dissociates in water to produce H+ ions it is known as an H+ donor and a good example of this is the strong hydrochloric acid (HCl). This acid easily dissociates in water to form H+ and the following equation represents this dissociation. HCl(aq) + H2O(l) Ãâà ® H3O+(aq) + Cl-(aq) Because HCl is easily dissociated, it means that equilibrium lies far to the right, favouring the products. On the contrary, a weak acid does not easily dissociate in water, meaning that a reaction involving a weak acid would not favour products or reactants. In contrast to an acid, a base dissociates in water to form OH- and is known as an H+ acceptor. The role of acids and bases for the maintenance of the pH of pool water is important for a number of reasons. A pH that is too high or low (above 8 or below 7.2) will cause irritation to the skin (Gothard, 2006). As well as this, disinfectants such as bromine and chlorine require an optimum pH between 7.2 and 7.6 in order to function most efficiently (Hann, 1997). Thus, an increase or decrease in pH will cause these disinfectants to work less efficiently. Another reason for the regulation of the pH balance is to prevent the formation of scale or water hardness deposits. These deposits are usually composed of magnesium and calcium which can become damaging to the functioning of a pool as it affects the filter system, heater and the piping (Hann, 1997). Maintenance of the pH levels Factors such as, the removal or addition of pool water; waste from swimmers such as urine; and the addition of chemicals, affect the pH of the water. In order to have a pH level that is desirable, specific chemicals need to be added to the water, although it is also possible to reach a desired pH balance by adding extra water to the pool (Hann, 1997). By adding additional water this will cause the pH concentration to lower, which helps to balance the pH. However, it is not always possible to do this as different factors affect the pH, and so pool chemicals are needed. Two main chemicals are used to lower the pH of pool water: sodium bisulfate and muriatic acid (hydrochloric acid). These chemicals both have a low pH which means that they act as a pH reducer. A decrease in pH occurs because the chemicals react in the water to produce more hydrogen ions, hence increasing the acidity. The choice of which chemical to use depends on the size of a pool. Sodium bisulfate is usually used for small pools (about 190 000 litres) as it is less acidic than muriatic acid, thus a safer alternative (Hann, 1997). On the other hand, muriatic acid is used for larger pools to reduce the pH because it is a more acidic. Furthermore, to raise the pH of pool water, sodium carbonate is most commonly used (Perkins, 2000). It is known as a pH increaser because it produces hydroxyl ions (OH-) which increases the pH of the pool water. Chlorine also has an effect on the pH of water; however, it is used more commonly for disinfection purposes. Chlorine for Disinfection of Pool Water A safe and clean pool requires the use of a disinfectant to stop the spread of transmittable diseases (Hann, 1997). The most common disinfectants used are chlorine-based products as chlorine is relatively inexpensive and is very effective in killing bacteria and other harmful organisms (Perkins, 2000).Chlorine gas (Cl2) is never used on its own for disinfecting pool water because it is very toxic, and so would pose many risks. Therefore, compounds containing chlorine are used instead and there are three main types: Calcium hypochlorite [Ca(OCl)2Ãâà ], sodium hypochlorite (NaOCl) and chlorinated isocyanurate. When these compounds are added to the water a reaction occurs, forming a chemical called hypochlorous acid (HOCl) which is an oxidising agent and hydrochloric acid (HCl). Since hydrochloric acid is formed, this will mean that the pH of the pool water decreases slightly. Cl2 + H2O Ãâà ® HOCl + HCl The hypochlorous acid kills the bacteria in the water by oxidation and the HOCl can easily become dissociated to from hydrogen ions (H+) and hypochlorate ions (ClO)-. HOCl à ¢Ã¢â¬ â⬠H+ + ClO- Both the hypochlorous acid and the hypochlorite ions are considered as free chlorine, which is the chemical species responsible for killing bacteria in the water; however, the hypochlorous acid is far more efficient (Daniels, 1973). The dissociation of the hydrochlorous acid is an equilibrium reaction, meaning that the reaction can occur in either direction. Furthermore, the pH of the water affects the direction in which the reaction proceeds, thus influencing the effectiveness of the disinfectant. An increase in pH would mean that there are more H+ ions which would cause the reaction to proceed to the right, meaning that less hypochlorous acid is present in the water. Moreover, a decrease in pH will cause the reaction to proceed to the left, meaning that more hypochlorous acid is produced which increases the effectiveness of the chlorine as a disinfectant. To be able to determine the pH of a solution, the use of acid/ base indicators are needed. The role of acid/base indicators In order to keep the pH of pool water in the correct range it is necessary to use an acid/base indicator to test the pH. An acid/base indicator is a substance that gives an accurate indication of the acidity or alkalinity of a solution (Dice, 2008). Also, an indicator is a weak acid represented by HIn (Zumdahl, 2007) and it can be written as an equilibrium expression: HIn (colourless) à ¢Ã¢â¬ â⬠H+ + In- (pink) where the In- is the basic form of the indicator. The HIn and the In- both show a different colour which corresponds to the pH of the solution. As an example, the indicator phenolphthalein is colourless in an acidic solution and pink in a basic solution. This means that the HIn represents the colourless molecules, whereas the In- represents the pinkmolecules. Since an indicator is in equilibrium, an acidic solution would cause an increase in H+ concentration, hence shifting equilibrium to the left. Likewise, in a basic solution the OH- ions cause a decrease in H+, which shifts equilibrium to the right. The equation for an indicator can be written as an equilibrium constant expression. Ka = [H+] [In-] / [HIn] This expression can be rearranged to form an equation which is very useful in finding the end point of an indicator, which is the point at which colour change occurs. Ka / [H+] = [In-] / [HIn] The ratio between the In- and the HIn will show the colour of the indicator; for example if there is one In- pink molecules for every one hundred colourless it means that the solution will appear colourless. However, for the human eye to detect the colour change, the colour change occurs at a pH where the ratio of In- to HIn is 1:10 for an acidic solution, whereas for a basic solution the change will occur at a ratio of 10:1 (Zumdahl, 2007). There are a variety of indicators all of which are useful for specific pH ranges, and so it is important to use an appropriate indicator for measuring pool water pH. The following table (figure 2) displays four different acid/base indicators that could be possibly used to assist with pool management. Four Possible Indicators for Testing pH of a pool (figure 2) Indicator pH range Colour shown for Acidic Solution Colour shown for Basic Solution Ka pKa (-log10Ka) Bromthymol Blue 6.0-7.6 Yellow Blue 1.0 x 10-7 7.0 Cresol Red (alkaline) 7.2-8.8 Yellow Reddish-purple 1.0 x 10-8.32 8.32 Phenol Red 6.8-8.4 Yellow Red 1.0 x 10-7.9 7.9 Phenolphthalein 8.3-10 Colourless Pink 1.0 x 10-9.3 9.3 From the table it can be seen that phenol red, cresol red and bromthymol blue would all be useful indicators as their pH range is quite close to the pH range of a pool which is 7.2-7.8. Since phenolphthaleins range is 8.-10, this indicator would be the least effective as is not very close to the pool range, whereas the other indicators each have similar ranges that are within the range. To verify the pH at which an indicator changes colour, the equation from above can be used: Ka = [H+] [In-] / [HIn] Sample calculation for the indicator phenol red: x 10-7.9 = [H+] [In-] / [HIn] First, the pH at which the indicator will change for an acidic solution will be found. For an acidic solution the colour change will be visible when [In-] / [HIn] = 1/10 : x 10-7.9 = [H+] (1) / (10) [H+] = (1.0 x 10-7.9) x 10 = 1.26 x 10-7 pH = -log(1.26 x 107à ¢Ã¢â ¬Ã¢â¬Ë) = 6.9 pH = 6.9, which is close to the actual value of 6.8. This means that at this point, the colour change will be yellow. The pH at which the colour change occurs in a basic solution can also be calculated, however, the ratio of In- to HIn will be 10:1 as there must be more In- molecules for a colour change to occur. x 10-7.9 = [H+] (10) / (1) [H+] = (1.0 x 10-7.9 )/ 10 = 1.26 x 10-9 pH = -log(1.26 x 10-9) = 8.90 pH = 8.9, which is the point at which the colour change will be red. However, the value is not exactly the same as the actual value because it is an approximation and is not exact. Phenol reds pH range is the closest to the pools range when compared to the other three indicators, which means that it is the most appropriate for testing pool water. Acid/base indicators are not only important for determining the pH of a solution, but are also significant for finding a pools buffering capacity, as the pH of a solution must be known. Buffer solutions To assist in the maintenance of pool pH, it is necessary to use a buffer solution. A buffer solution is any solution which resists fluctuating changes in pH, making it easier to keep pool water in the appropriate pH range (Hann, 1997). The buffering ability of a pool is dependent on the total alkalinity, which is the measure of the quantity of alkaline substances present in the water (Hann, 1997). Calcium carbonate is the main compound which makes up the total alkalinity and when it is dissolved in water it produces carbonate ions which act as a buffer. CaCO3 (s) à ¢Ã¢â¬ â⬠Ca2+ + CO32- The carbonate ions work as a buffer because they neutralise the H+ ions formed when an acid is added. To determine the buffering ability of a solution, the Henderson-Hasselbalch equation can be used. This equation is derived from the equilibrium constant for the dissociation of a weak acid which is given by the equation: Ka = ([H+] [A-]) / [HA] where A- is the conjugate base, and HA is a simple acid. By taking the logarithm of both sides and rearranging it will give the following equation: -log [H+] = -logKa + log ([A-]/[HA]) Since, -log [H+] = pH and -logKa = pKa, the equation can be written as: pH = pKa + log ([A-]/[HA]) This equation is known as the Henderson-Hasselbalch equation and can be used in regards to pool chemistry to be able to calculate the buffering capacity, which is the quantity of hydroxide ions (OH-) that can be absorbed by the solution before a significant pH change occurs. Additionally, the magnitude of [HA] and [A-] determine the buffering capacity of a solution. The most effective buffer is one that has a ratio of one, as this will cause no change in pH (Zumdahl, 2007). The following calculation will show a possible application of buffer chemistry for the pool. pH = pKa + log ([A-]/[HA]) A concentration of 0.002M Hydrochloric acid is added to a solution with a pH of 7.6 and a calcium carbonate concentration of 2.11 x 10-8M. Hypochlorous acid is also present in the water and its pKa is 3.5 x 10-8. 7.6 = 3.5 x 10-8 + log ([2.11 x 10-8]/[0.002]) = 7.46 Therefore, the pH of the solution has decreased, which means that the solution does not have the best buffering capacity. The best buffer solution would need to have a ratio of 1:1 which would cause the pH to stay about the same. Conclusion The chemistry involved in the management of backyard swimming pools is an important aspect and needs to be understood in order to maintain a safe swimming pool environment. A pH range between 7.2 and 7.8 is recommended and so an understanding of how to lower and raise the pH is essential. Chlorine can be used as a disinfectant of pool water; however, it needs to be known that the reaction forms hydrochloric acid which lowers the pH. Thus, an addition of a pH increaser such as sodium carbonate is needed as this increases the number of OH- molecules in the water, which increases the pH. Furthermore, the use of pH indicators is necessary in controlling the pH, as they give an accurate reading of the pools pH. However, each indicator has a different pH range and so it is important to choose the appropriate indicator for the pool. Also, a pools buffering ability is significant in keeping the pools pH in balance. Poor buffering capacity means that an addition of an acid or a base will caus e the pH to dramatically fluctuate, making it difficult to manage a pool. Total alkalinity is the measure of a pools buffering ability and calcium carbonate is often used to increase the buffering ability.
Sunday, October 13, 2019
Nociception :: Biology Essays Research Papers
Nociception Pain is possibly the most unpleasant sensations our senses can detect. Even though we typically fail to remember what pain feels like when we are not experiencing it, we certainly do not wish to experience pain. Despite pain's unpleasantness, it has to be appreciated for what it is. Namely, a mechanism that allows us to avoid dangerous situations, to prevent further damage, and to promote the healing process. Pain allows us to remove ourselves form dangerous situations, as we attempt to move away from noxious stimuli that cause pain. As we attempt to escape stimuli that cause pain after an initial insult on our body, pain can prevent further damage form occurring. Finally, pain promotes the healing process as we take great care to protect an injured body part form further damage as to minimize the experience of more pain. How is this unpleasant, yet helpful sensation detected? Nociception is the term commonly used to refer to the perception of pain. The receptors involved in pain detection are aptly enough referred to as nociceptors - receptors for noxious stimuli. (1) These nociceptors are free nerve endings that terminate just below the skin as to detect cutaneous pain. Nociceptors are also located in tendons and joints, for detection of somatic pain and in body organs to detect visceral pain. Pain receptors are very numerous in then skin, hence pain detection here is well defined and the source of pain can be easily localized. In tendons, joints, and body organs the pain receptors are fewer. The source of pain therefore is not readily localized. Apparently, the number of nociceptors also influences the duration of the pain felt. Cutaneous pain typically is of short duration, but may be reactivated upon new impacts, while somatic and visceral pain is of longer duration. (2) It is important to note that almost all body tissue is equipped with nociceptors. (1, 2) As explained above, this is an important fact, as pain has primary warning functions. If we did not feel pain and if pain did not impinge on our well-being, we would not seek help when our body aches. Hence, it makes evolutionary sense for the body to be so well equipped with nociceptors in almost all locations. The most notable exception to this logic is the brain. The brain itself has no nociceptors and therefore is pain insensitive. Why is this all-important structure not equipped with and therefore indirectly protected by nociceptors? Nociception :: Biology Essays Research Papers Nociception Pain is possibly the most unpleasant sensations our senses can detect. Even though we typically fail to remember what pain feels like when we are not experiencing it, we certainly do not wish to experience pain. Despite pain's unpleasantness, it has to be appreciated for what it is. Namely, a mechanism that allows us to avoid dangerous situations, to prevent further damage, and to promote the healing process. Pain allows us to remove ourselves form dangerous situations, as we attempt to move away from noxious stimuli that cause pain. As we attempt to escape stimuli that cause pain after an initial insult on our body, pain can prevent further damage form occurring. Finally, pain promotes the healing process as we take great care to protect an injured body part form further damage as to minimize the experience of more pain. How is this unpleasant, yet helpful sensation detected? Nociception is the term commonly used to refer to the perception of pain. The receptors involved in pain detection are aptly enough referred to as nociceptors - receptors for noxious stimuli. (1) These nociceptors are free nerve endings that terminate just below the skin as to detect cutaneous pain. Nociceptors are also located in tendons and joints, for detection of somatic pain and in body organs to detect visceral pain. Pain receptors are very numerous in then skin, hence pain detection here is well defined and the source of pain can be easily localized. In tendons, joints, and body organs the pain receptors are fewer. The source of pain therefore is not readily localized. Apparently, the number of nociceptors also influences the duration of the pain felt. Cutaneous pain typically is of short duration, but may be reactivated upon new impacts, while somatic and visceral pain is of longer duration. (2) It is important to note that almost all body tissue is equipped with nociceptors. (1, 2) As explained above, this is an important fact, as pain has primary warning functions. If we did not feel pain and if pain did not impinge on our well-being, we would not seek help when our body aches. Hence, it makes evolutionary sense for the body to be so well equipped with nociceptors in almost all locations. The most notable exception to this logic is the brain. The brain itself has no nociceptors and therefore is pain insensitive. Why is this all-important structure not equipped with and therefore indirectly protected by nociceptors?
Subscribe to:
Posts (Atom)